Perfectly Encoding π-Conjugated Anions in the RE5(C3N3O3)(OH)12 (RE=Y,Yb, Lu) Family with Strong Second Harmonic Generation Response and Balanced Birefringence

Nonlinear optical (NLO) crystal, which simultaneously exhibits strong second-harmonic-generation (SHG) response and desired optical anisotropy, is a core optical material accessible to the modern optoelectronics. Accompanied by strong SHG effect in a NLO crystal, a contradictory problem of overlarge birefringence is ignored, leading to low frequency doubling efficiency and poor beam quality. Herein, a series of rare earth cyanurates RE₅(C₃N₃O₃)(OH)₁₂ (RE=Y, Yb, Lu) were successfully characterized by 3D electron diffraction technique. Based on a “three birds with one stone” strategy, they enable the simultaneous fulfillment of strong SHG responses (2.5–4.2× KH₂PO₄), short UV cutoff (ca. 220 nm) and applicable birefringence (ca. 0.15 at 800 nm) by the introduction of rare earth coordination control of π-conjugated (C₃N₃O₃)³⁻ anions. These findings provide high-performance short-wavelength NLO materials and highlight the exploration of cyanurates as a new research area.     

三核过渡金属配合物在催化反应中的研究进展

多核过渡金属配合物作为一类广泛应用的均相催化剂,其设计灵感往往来自天然酶的多金属活性位点所发挥的重要作用.目前,三核金属配合物作为活化小分子的多金属催化剂受到了广泛的关注.为深入理解三核过渡金属配合物在催化反应中作用特点,对近年报道的代表性三核过渡金属配合物按金属中心进行分类,并对配体环境形成特点及催化应用进行综述.从金属中心出发,讨论了三核过渡金属配合物的几何结构和电子特征;从配体环境出发,总结了关联三个独立的金属位点的配位环境特征;在催化应用方面,重点综述了三核过渡金属配合物在涉及特定化学键活化反应的催化作用机制,最后对三核过渡金属配合物的催化应用前景进行展望.     

利用空间位阻和氢溢流协同作用促进5-羟甲基糠醛选择性加氢制备5-甲基糠醛

Selective hydrogenation is a vital class of reaction. Various unsaturated functional groups in organic compounds, such as aromatic rings, alkynyl (C≡C), carbonyl (C＝O), nitro (-NO₂), and alkenyl (C＝C) groups, are typical targets in selective hydrogenation. Therefore, selectivity is a key indicator of the efficiency of a designed hydrogenation reaction. 5-(Hydroxymethyl)furfural (HMF) is an important platform compound in the context of biomass conversion, and recently, the hydrogenation of HMF to produce fuels and other valuable chemicals has received significant attention. Controlling the selectivity of HMF hydrogenation is paramount because of the different reducible functional groups (C＝O, C-OH, and C＝C) in HMF. Moreover, the exploration of new routes for hydrogenating HMF to valuable chemicals is becoming attractive. 5-Methylfurfural (MF) is also an important organic compound; thus, the selective hydrogenation of HMF to MF is an essential synthetic route. However, this reaction has challenging thermodynamic and kinetic aspects, making it difficult to realize. Herein, we propose a strategy to design a highly efficient catalytic system for selective hydrogenation by exploiting the synergy between steric hindrance and hydrogen spillover. The design and preparation of the Pt@PVP/Nb₂O₅ catalyst (PVP = polyvinyl pyrrolidone; Nb₂O₅ = niobium(V) oxide) were also conducted. Surprisingly, HMF could be converted to MF with 92% selectivity at 100% HMF conversion. The reaction pathway was revealed through the combination of control experiments and density functional theory calculations. Although PVP blocked HMF from accessing the surface of Pt, hydrogen (H₂) could be activated on the surface of Pt due to its small molecular size, and the activated H₂ could migrate to the surface of Nb₂O₅ through a phenomenon called H₂ spillover. The Lewis acidic surface of Nb₂O₅ could not adsorb the C＝O group but could adsorb and activate the C-OH group of HMF; therefore, when HMF was adsorbed on Nb₂O₅, the C-OH groups were hydrogenated by the spilled over H₂ to form MF. The high selectivity of this reaction was realized because of the unique combination of steric effects, hydrogen spillover, and tuning of the electronic states of the Pt and Nb₂O₅ surfaces. This new route for producing MF has great potential for practical application owing to its discovered advantages. We believe that this novel strategy can be used to design catalysts for other selective hydrogenation reactions. Furthermore, this study demonstrates a significant breakthrough in selective hydrogenation, which will be of interest to researchers working on the utilization of biomass, organic synthesis, catalysis, and other related fields.      

Enhancing Built-in Electric Fields for Efficient Photocatalytic Hydrogen Evolution by Encapsulating C60 Fullerene into Zirconium-Based Metal-Organic Frameworks

High-efficiency photocatalysts based on metal-organic frameworks (MOFs) are often limited by poor charge separation and slow charge-transfer kinetics. Herein, a novel MOF photocatalyst is successfully constructed by encapsulating C₆₀ into a nano-sized zirconium-based MOF, NU-901. By virtue of host-guest interactions and uneven charge distribution, a substantial electrostatic potential difference is set-up in C₆₀@NU-901. The direct consequence is a robust built-in electric field, which tends to be 10.7 times higher in C₆₀@NU-901 than that found in NU-901. In the catalyst, photogenerated charge carriers are efficiently separated and transported to the surface. For example, photocatalytic hydrogen evolution reaches 22.3 mmol g⁻¹ h⁻¹ for C₆₀@NU-901, which is among the highest values for MOFs. Our concept of enhancing charge separation by harnessing host-guest interactions constitutes a promising strategy to design photocatalysts for efficient solar-to-chemical energy conversion.     

A Petrochemical-Free Route to Superelastic Hierarchical Cellulose Aerogel

Cellulose aerogels are plagued by intermolecular hydrogen bond-induced structural plasticity, otherwise rely on chemicals modification to extend service life. Here, we demonstrate a petrochemical-free strategy to fabricate superelastic cellulose aerogels by designing hierarchical structures at multi scales. Oriented channels consolidate the whole architecture. Porous walls of dehydrated cellulose derived from thermal etching not only exhibit decreased rigidity and stickiness, but also guide the microscopic deformation and mitigate localized large strain, preventing structural collapse. The aerogels show exceptional stability, including temperature-invariant elasticity, fatigue resistance (∼5 % plastic deformation after 10⁵ cycles), high angular recovery speed (1475.4° s⁻¹), outperforming most cellulose-based aerogels. This benign strategy retains the biosafety of biomass and provides an alternative filter material for health-related applications, such as face masks and air purification.     

Synthesis of Multifluoromethylated γ-Sultines by a Photoinduced Radical Addition–Polar Cyclization

Despite the significance of sultines in synthesis, medicine, and materials science, the chemistry of sultines has remained unexplored due to their inaccessibility. Herein, we demonstrate the development of a photoredox-catalyzed multifluoromethyl radical addition/SO₂ incorporation/polar cyclization cascade approach to multifluoromethylated γ-sultines. The reactions proceed by single electron transfer induced multifluoromethyl radical addition to an alkene followed by SO₂ incorporation, and single-electron reduction for polar 5-exo-tet cyclization. Key to the success of the protocol is the use of easily oxidizable multifluoroalkanesulfinates as bifunctional reagents. The reactions proceed with excellent functional-group tolerance to deliver γ-sultines in moderate to excellent yields.     

Solvent-Free Heterogeneous Catalytic Hydrogenation of Polyesters to Diols

The utilization of carbon resources stored in plastic polymers through chemical recycling and upcycling is a promising approach for mitigating plastic waste. However, most current methods for upcycling suffer from limited selectivity towards a specific valuable product, particularly when attempting full conversion of the plastic. We present a highly selective reaction route for transforming polylactic acid (PLA) into 1,2-propanediol utilizing a Zn-modified Cu catalyst. This reaction exhibits excellent reactivity (0.65 g g_cat⁻¹ h⁻¹) and selectivity (99.5 %) towards 1,2-propanediol, and most importantly, can be performed in a solvent-free mode. Significantly, the overall solvent-free reaction is an atom-economical reaction with all the atoms in reactants (PLA and H₂) fixed into the final product (1,2-propanediol), eliminating the need for a separation process. This method provides an innovative and economically viable solution for upgrading polyesters to produce high-purity products under mild conditions with optimal atom utilization.     

Acidic Media Impedes Tandem Catalysis Reaction Pathways in Electrochemical CO2 Reduction

Electrochemical CO₂ reduction (CO₂R) in acidic media with Cu-based catalysts tends to suffer from lowered selectivity towards multicarbon products. This could in principle be mitigated using tandem catalysis, whereby the *CO coverage on Cu is increased by introducing a CO generating catalyst (e.g. Ag) in close proximity. Although this has seen significant success in neutral/alkaline media, here we report that such a strategy becomes impeded in acidic electrolyte. This was investigated through the co-reduction of ¹³CO₂/¹²CO mixtures using a series of Cu and CuAg catalysts. These experiments provide strong evidence for the occurrence of tandem catalysis in neutral media and its curtailment under acidic conditions. Density functional theory simulations suggest that the presence of H₃O⁺ weakens the *CO binding energy of Cu, preventing effective utilization of tandem-supplied CO. Our findings also provide other unanticipated insights into the tandem catalysis reaction pathway and important design considerations for effective CO₂R in acidic media.     

Dual Photosensitizer Coupled Three-Dimensional Metal-Covalent Organic Frameworks for Efficient Photocatalytic Reactions

In this work, we innovatively assembled two types of traditional photosensitizers, that is pyridine ruthenium/ferrum (Ru(bpy)₃²⁺/Fe(bpy)₃²⁺) and porphyrin/metalloporphyrin complex (2HPor/ZnPor) by covalent linkage to get a series of dual photosensitizer-based three-dimensional metal-covalent organic frameworks (3D MCOFs), which behaved strong visible light-absorbing ability, efficient electron transfer and suitable band gap for highly efficient photocatalytic hydrogen (H₂) evolution. Rubpy-ZnPor COF achieved the highest H₂ yield (30 338 μmol g⁻¹ h⁻¹) with apparent quantum efficiency (AQE) of 9.68 %@420 nm, which showed one of the best performances among all reported COF based photocatalysts. Furthermore, the in situ produced H₂ was successfully tandem used in the alkyne hydrogenation with ≈99.9 % conversion efficiency. Theoretical calculations reveal that both the two photosensitizer units in MCOFs can be photoexcited and thus contribute optimal photocatalytic activity. This work develops a general strategy and shows the great potential of using multiple photosensitive materials in the field of photocatalysis.     

Photocatalytic 2-Iodoethanol Coupling to Produce 1,4-Butanediol Mediated by TiO2 and a Catalytic Nickel Complex

Photocatalytic 2-iodoethanol (IEO) coupling provides 1,4-butanediol (BDO) of particular interest to produce degradable polyesters. However, the reduction potential of IEO is too negative (−1.9 vs NHE) to be satisfied by most of the semiconductors, and the kinetics of transferring one electron for IEO coupling is slow. Here we design a catalytic Ni complex, which works synergistically with TiO₂, realizing reductive coupling of IEO powered by photo-energy. Coordinating by terpyridine stabilizes Ni²⁺ from being photo-deposited to TiO₂, thereby retaining the steric configuration beneficial for IEO coupling. The Ni complex can rapidly extract electrons from TiO₂, generating a low-valent Ni capable of reducing IEO. The photocatalytic IEO coupling thus provides BDO in 72 % selectivity. By a stepwise procedure, BDO is obtained with 70 % selectivity from ethylene glycol. This work put forward a strategy for the photocatalytic reduction of molecules requiring strong negative potential.